Bag

How the listening room works.

It is a simulation, and an honest one: real recordings, filtered by the noise reduction each model publishes. Here is exactly what it does.

The recordings

Four real places, each recorded by someone else and shared under CC0 on freesound.org: a city street, a train, a café and an open office. We cut 30 seconds of each into a seamless loop and set their levels apart roughly as the places differ, so the train is louder than the office.

The levels in the room, such as "about 75 dB(A)" for a train, are typical figures for such places, not measurements of these files. Your own volume setting decides how loud they really play.

The curves

Each model publishes how much quieter it makes the world at eight frequencies, from the deep rumble at 63 Hz to the hiss at 8 kHz, in three states: transparency, noise cancelling off (the seal of the cushions or tips alone) and noise cancelling at maximum. Moving the slider blends between them.

Published noise reduction in decibels, at maximum noise cancelling

The filters

The sound runs through seventeen filters in your browser (Web Audio): a low shelf, peaking bands every half octave from 63 Hz to 8 kHz, and a high shelf. Their settings are fitted so the chain follows the published curve within about 2 dB from 40 Hz to 12 kHz. The graph in the room draws the real response of those filters, with the published points on top.

Nothing leaves your device: the recordings are files on this site, and the filtering happens in the page.

What it cannot tell you

How a pair sounds with music, how it feels on your head, or how well it seals on your ears: a loose fit can halve the low-frequency cancelling. Your own headphones or speakers also colour what you hear. Use the room to compare pairs with each other, then use the sixty-night trial to judge them for real.

Sound, photo and film credits.

Recordings: freesound.org, CC0. Photographs and films: Pexels, under the Pexels licence. Lull and its models are fictional.